[LUNI] rsync HELP NEEDED.

[Richard Reina]

I killed it then restarted then restarted: 

 it and still get the same result. 


Howwever, cat /var/log/rysnc gives me this:

[18238] rsync: name lookup failed for 192.168.0.2:
Name or service not known.
[18238] rsync to test-data from UNKNOWN (192.168.0.2)
[18239] wrote 29 bytes read 99 bytes total size 9
[18234] rsync error: received SIGUSR1 or SIGINT (code
20) at rsync.c(225)
 
Any idea what could have happened.  Thanks again, for
all the help thus far.

R

--- Joe Digilio <jgd42-luni at yahoo.com> wrote:

> Rsync is already running.
> I don't know if it was started by the system or if
> it was started manually.
> Either way...
> As root, kill it (kill 17595).
> Then start it up again (rsync --daemon).
> But be advised that won't survive a reboot. You'll
> want to configure your inetd
> daemon to handle that.
> 
> -Joe
> 
> 
> --- Richard Reina <richard at rushlogistics.com> wrote:
> 
> > Joe, Thanks again for your response.
> > 
> > /usr/sbin/lsof -i :873
> > COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
> > rsync  17595 root 5uIPv4 122813      TCP *:rsync
> > (LISTEN)
> > 
> > 
> > rsync -vvv --stats --progress file1
> > 192.168.0.14::test-data
> > 
> > I get:
> > 
> > local_version=24 remote_version=28
> > make_file(3,TEST2)
> > send_file_list done
> > send_files starting
> > send_files phase=1
> > send files finished
> > total: matches=0 tag_hits=0 false_alarms=0 data=0
> > 
> > Number of files: 1
> > Number of files transferred: 0
> > Total file size: 9 bytes
> > Total transferred file size: 0 bytes
> > Literal data: 0 bytes
> > Matched data: 0 bytes
> > File list size: 24
> > Total bytes written: 99
> > Total bytes read: 41
> > 
> > wrote 98 bytes read 41 bytes 278 bytes/sec
> > total size is 9 speed is 0.06
> > 
> > Not sure what all this means?
> > 
> > --- Joe Digilio <jgd42-luni at yahoo.com> wrote:
> > 
> > > Hmm, that is strange that rsync looks like it
> works.
> > > try this instead
> > >   rsync -vvv --stats --progress file1
> > > 192.168.0.14::test-data
> > > 
> > > But looking at the log output, it seems that
> rsyncd
> > > cannot bind to port 873.
> > > Maybe rsyncd is already running? ("lsof -i :873"
> > > will tell you what's listening
> > > on port 873.)
> > > 
> > > 
> > > -Joe
> > > 
> > > 
> > > --- Richard Reina wrote:
> > > > Joe,
> > > > 
> > > > Thanks very much for the reply.  I followed
> your
> > > > advice  and I'm getting closer.
> > > > 
> > > > rsync -vv file1 192.168.0.14::test-data
> > > > total: matches=0 tag_hits=0 data=0
> > > > wrote 98 bytes read 41 bytes 278 bytes/sec
> > > > total size is 9 speed is 0.06
> > > > 
> > > > After seeing that I thought it had worked.
> Except
> > > > file1 is not on 192.168.0.14. 
> > > > 
> > > > 192.168.0.14
> > > > cat /var/log/rsync
> > > > 
> > > > 2005/03/12 11:33:27 [18105] rsyncd version
> 2.6.2
> > > > starting, listening on port 873
> > > > 2005/03/12 11:33:27 [18105] rsync: open
> inbound
> > > socket
> > > > on port 873 failed: Address already in use
> > > > 2005/03/12 11:33:27 [18105] rsync error: error
> in
> > > > socket IO (code 10) at socket .c(456)
> > > > 
> > > > Any idea what am I missing?  Thanks again ofr
> your
> > > > help thus far.
> > > > 
> > > > R
> > > > 
> > > > --- Joe Digilio <jgd42-luni at yahoo.com> wrote:
> > > > 
> > > > > First, your rsyncd.conf file...
> > > > > * remove the "syslog facility" line. You
> don't
> > > need
> > > > > it for testing and likely
> > > > > don't have it set correctly anyways (unless
> > > "yes" is
> > > > > a facility in your
> > > > > syslog.conf file)
> > > > > 
> > > > > * add a line for logging similar to this in
> the
> > > > > global section (ie, not in a
> > > > > module)
> > > > > log file = /var/log/rsync
> > > > > 
> > > > > * Most of those options should be in the
> global
> > > > > section. Your rsyncd.conf
> > > > > should look similar to this:
> > > > > 
> > > > > ### BEGIN rsyncd.conf ###
> > > > > pid file = /var/run/rsyncd.pid
> > > > > motd     = /etc/rsyncd/motd
> > > > > log file = /var/log/rsync
> > > > > 
> > > > > [test-data]
> > > > >   path    = /home/richard
> > > > >   max connections = 10
> > > > >   read only = no
> > > > > ### END rsyncd.conf ###
> > > > > 
> > > > > 
> > > > > Next, because you have the "path" option set
> in
> > > > > rsyncd.conf, you don't need
> > > > > /home/richard when you run rsync.  I should
> be
> > > > > something like this:
> > > > > 
> > > > >   rsync file1
> > > 192.168.0.14::test-data/home/richard
> > > > 
> > > > > 
> > > > > I added the verbose options so you can see
> more
> > > of
> > > > > what's going on.
> > > > > 
> > > > > If it still doesn't work, check the log file
> > > > > (/var/log/rsync) on 192.168.0.14.
> > > > > Also, what version are you using? 2.6.3 has
> > > better
> > > > > error handling functionality
> > > > > than previous versions.
> > > > > 
> > > > > HTH.
> > > > > 
> > > > > -Joe
> > > > > 
> > > > > 
> > > > > --- Richard Reina wrote:
> > > > > > I am trying to copy a file with rsync.
> > > > > > 
> > > > > > the remote machine's /etc/rsyncd.conf 
> > > > > > 
> > > > > > [test-data]
> > > > > > path    = /home/richard
> > > > > > motd    = /etc/rsyncd/motd
> > > > > > max connections = 10
> > > > > > read only = no
> > > > > > syslog facility = yes
> > > > > > pid file = /var/run/rsyncd.pid
> > > > > > 
> > > > > > I have started rsyncd with the command:
> > > > > > rsync --daemon
> > > > > > 
> > > > > > When I try:
> > > > > > 
> > > > > > rsync file1
> > > 192.168.0.14::test-data/home/richard
> > > > > > 
> > > > > > I get:
> > > > > > 
> > > > > > unexpected EOF in read_timeout
> > > > > > 
> > > > > > If I try:
> > > > > > 
> > > > > > rsync file1 192.168.0.14::test-data
> > > /home/richard
> > > > > > 
> > > > > > I get:
> > > > > > 
> 
=== message truncated ===